IV Pole Syringe Holders Various
Description
The original intent was to create syringe holders to meet the needs of a fellow nurse, my brother actually, working in a cath lab using an ACIST CVi IV contrast unit. These were mounted on the IV pole risers on his cart. The 3 and 6 syringe holders are designed to hold a 10cc flush and fit poles with about a 11-12mm diameter. The smaller syringe holder, syringe holder A, is for smaller syringes or marking pens. Important note, the 3 syringe model was designed to be made in TPU. I added stiffeners in design. If you make it in PETG, you will need to open up the mouth of the mounting C clip, or thin out the stiffening ribs. the 6 syringe holder works well but the orientation of the clips makes cleaning out the supports a pain in the gluteus maximus. You can use my parts file to make that one with the C clip oriented vertically and in the center of the “rack” but the horizontal orientation of the 6 syringe holder is a bit wide. The 3 syringe holder, SyringeHolder3 and small SyringeHolderA, do not need supports. I have attached a file of of syringe holder parts, so you can scale them for different pole and syringe diameters.
Statistics
Likes
0
Downloads
0