Wt32-Sc01 Plus enclosure + Mount
Description
Hello, In our house, I'm using several displays with an ESP32(-S3) build in. For the workshop in my garage I bought a WT32-Sc01 Plus from aliexpress and flashed it with the openhasp firmware. I designed an enclosure to mount it directly on the enclosure of my 3d printer. To mount it, you have to melt 2 heat threaded nuts in (M3x5x5). Display:https://de.aliexpress.com/item/1005004916323823.html Connector: https://de.aliexpress.com/item/1005004308681960.html Heat inserts: M3x5x5 https://de.aliexpress.com/item/1005003144176136.html Screws: 2x M3x 6mm + 2x M3x10 + 2 M3 nuts + 2 woodscrews 3x12mm https://de.aliexpress.com/item/1005004921768199.html https://de.aliexpress.com/item/1005003144176136.html Firmware: https://www.openhasp.com/ At the moment, the firmware for he WT32-SC01 Plus is in development status. you have to download it from here: https://nightly.openhasp.com/ Instructions and pinout: https://github.com/HASwitchPlate/openHASP/issues/390#issuecomment-1328090325
Statistics
Likes
0
Downloads
1