Zeal Magazine 6/7 (Talon Compatible)
Description
Talon Compatible magazine with a Katana/DZ pro style feed lip. Contains two options, a 6 dart version intended for use with the included printed spring, and a 7 dart version intended for use with metal springs. Multiple different versions of the pusher and corresponding peg for personal taste, or different printer and filament settings. All parts can be printed without support at 0.2mm layer height. Pusher should be printed at 30% or lower, while the spring should be printed at 100%. The plastic spring can be printed in PLA, however it is not very good. It will feed if used immediately, but will quickly deteriorate when left loaded. The spring is also relatively fragile, and can break if over compressed, which is why the 6 dart version is meant to stop the pusher at exactly 6 darts, as going further can crack the spring. If anyone has a better design for a printable spring in PLA or TPU, do DM me about it.
Statistics
Likes
0
Downloads
0