Focbox Unity ESC Encloser Mount
Description
This is an enclosure for the Focbox Unity dual ESC. It may fit the Xenith as well. There's a few different versions with cutouts for motor, pwr, and heatsink, and several combinations too. It mounts with some M3 screws, recommend some foam sticky tape/padding underneath, and threadlock. Also recommend same thing on the board to seal better. Also recommend some caulking or silicone goop or similar for watersealing the wires. Mounts underneath with 4x standard skateboard #10-32 screws.
Statistics
Likes
0
Downloads
0