Targus Docking Station Wall Mount
Description
I made this mounting bracket for a family member who works from home. They have a laptop in the center of two screens, and with no where really safe, easy or convenient to put the docking station, they asked me to find a way to mount it behind one of the monitors. I opened Fusion 360 and came up with this. It is 5" x 1" x 0.25". Printed with an Ender 3 S-1 using Inland Black PLA+ 1.75mm. Initial Nozzle Temp of 205.0 and Bed Temp of 65.0 and 200.0/60.0 for the rest of the print. 20% Infill, Layer Height of 0.2mm Minimal supports to support the brim in the docking station holes to keep them from stringing. Make sure you rotate the model 90* to make sure it lays flat. It took just over 1h 10m to print. Zero finishing required, except for removing the support if you chose to use them.
Statistics
Likes
0
Downloads
0