TalentCell 6000mah Case
Description
This is a minimal case design for the lithium cells of the TalentCell 6000mah battery (without USB port) for use in the HasLab Proton Pack. This fits perfectly in the void below the controller and under the stock D-cell battery holder. The intent is to provide some protection and avoid movement of the batteries while keeping them positioned in an available space. It will be necessary to permanently remove 2 of the screw posts which normally hold the divider between the external compartment and the void below the stock battery holder. The lid has a slit to fit the wires between the battery cells and the switch/port PCB, keeping it stationary where it will not interfere with closing of the pack and reduces strain on the solder joints. Disassembly of the battery pack should be done with caution and at your discretion--not responsible for damage to the cells during removal from the original case!
Statistics
Likes
0
Downloads
0