Bauer20V battery adapter
Description
I have a Dewalt adapter that has been very popular so I thought I put this Bauer adapter up since it's starting to get popular on my tool bench at least. These are available at Harbor Freight. Summary Bauer 20v battery holder or adapter. You could use this just as a mountable holder or if you insert a 2ea. 12.5 x 23mm brass strips you can connect to the battery. DON'T CONNECT TO THE BATTERY IF YOU DON'T UNDERSTAND THE HAZARDS. IF YOU INTEND TO READ ON. Li-ion battery's can be easily ruined by discharging below 3 volts per cell. Murphy's law states that you will forget. If you make use of the battery power then make sure the device will disconnect when the battery voltage gets below 3 volts per cell. Don't use this as a connector to charge the battery intentionally or by accident. It can cause the battery to explode and or burst into flames. This disables all the charge, discharge protections that or provided in the Bauer tools and the connection to the extra pins are not provided. I'm using this because I shut my device down when the battery voltage gets low and I always use the appropriate Bauer battery charger when charging. This provides a safe battery for my projects that is well protected when handling and provides an inexpensive charger. Prints perfectly on my MK3 vertically with no supports. Thanks Kisssys
Statistics
Likes
0
Downloads
0