Ender 3 PSU bottom case
Description
I made this model to replace my original Ender 3 PSU to the back of the printer, below the Y axis. Since the PSU is taller than the space below the axis, I also printed some feet for the printer. To attach the model to the PSU you'll need 5 M4 screws, and to attach to the frame 4 M5 screws and 2 M3 nuts + screws. The cover goes to the bottom of the PSU. Also I added some space to a cable through the 4040 aluminium profile (I have mounted the power button to the front of the printer). PS. Sorry for the print quality, my printer is still under fine tune after the modifications. And I had no short M4 screws at home, so I needed to improvize a bit, making the screws 'shorter' without cutting them
Statistics
Likes
0
Downloads
0