Telescope 1.25" Focuser Replacement for 0.965"
Description
This is a 1.25" replacement for 0.965" focusers on 70mm Newtonian telescopes. I have continued to use the shaft with the gear and its cover. The shaft has a diameter of 5mm. The holes for the screws are at the same place, so you can exchange the eyepiece focusers 1:1. I used the original screws for the cover of the shaft. I printed both parts with an Ender 3 V2 with support and 0.12mm resolution. The eyepieces are fixed with a m3 screw. For this, a m3 threaded insert must be used. The objects should be printed in upright position.
Statistics
Likes
0
Downloads
0