Grizzly Hand Guards .v1
Description
These are version 1 of the GrizzlyCentral hand guard build. You will need PETG & TPU for this project. You will also need some hardware; 4 x M5x35mm Flat head socket cap screws, 10 x M5 T Nuts (for t/v slot 20mm rails),and 6 x M5x15mm Socket head cap screws. Mount - 90% infill / .2mm layers / PETG Bushings - 100% infill / .3mm layers / TPU *Horizontal Arm - 95% infill / .3mm layers / TPU *Body & *Shield - 50%+ infill / .3mm layers / PETG *Mirror the necessary parts in your slicer app for the Right side. Total print time (for me) was about 42 hours for all parts. Assembles in minutes. Trail tested twice with great success. For assistance on printing or assembly head over to GrizzlyCentral dot com, and find my 3D Printing & Prototyping thread. Be glad to help you. Search "Grizzerino" you'll find it.
Statistics
Likes
0
Downloads
0