Pixel Star w/ Mount
Description
This pixel bullet star has 12mm holes and will take a 150 pixels. It's made to print on a bed that has capacity of 200mm. Entire snowflake assembled will be about 19.5" in size. Assembly requires 20 M3 x 6mm screws and nuts. This can be glued in addition to the screws for extra strength. Currently I have only designed 1 Mount which is for a 3/4" EMT conduit. I added 2 holes to this mount so that you can secure it with screws. The mount itself attaches to the start with M4 x 20mm screws and nuts. You will need to print 5 of the points and 1 hub.
Statistics
Likes
0
Downloads
0