Adjustable Replicator 2 Gopro Mount
Description
An Adjustable Mount For The Replicator 2 To Be Used With A Gopro To Record Time-Lapse Videos Of Things Printing! //Edit 10/9/13: I Re-Uploaded The 'Mount Arm' Stl Because I Encountered A Problem While Printing It. The Problem Should Be Fixed Now, But I'Ll Know For Sure When I Can Re-Print It. //Edit 10/10/13: I'M Going To Have To Re-Upload Both The 'Pin' And 'Mount Arm' Stl Files Because The Pin Would Not Fit In The Adjustable Arm, So I Made The Pin Smaller, And The Slot On The Mount Arm Wider. ^Just Finished Printing The New Pin And It'S Still A Bit Tight, But With A Bit Of Wear It Should Be Fine. //Edit 10/24/13: Some People Have Been Having Issues With Their Camera Case Not Fitting Into The Mount At The Right Angles, I Have Two Solutions To This That I Could Implement... I Could Either Re-Design The Model I Made To Be More Giving In Terms Of Adjustment Of The Camera, Or I Could Take A Few Different Cases And Remix Them To Be Able To Be Used With My Design... I'Ll Figure It Out And Fix The Problem. ^I Took The Easy Way Out And I Changed The Arm A Bit, I'Ve Uploaded The New File, But I Won'T Know If It Works Any Better Until I Print It Myself And See...
Statistics
Likes
16
Downloads
0