Jet 714400K Bandsaw Table Insert
Description
Lost the original insert from the bandsaw so had to create one from scratch based on web photos. You can find an 1/8" clearance and one that mimics the Jet original at 3/8". Working on one that will have the 1/8 slot at 45 degrees for the angled cuts. The depth on this one is set to 3.2mm, which makes it fit right to the top of the table on our bandsaw. Have seen others at 2.4mm and just leaves too much room for the wood to stick on. STLs are on the large size, to ensure best print quality.
Statistics
Likes
0
Downloads
0