LST-S2 FPV head for Dancing Rider
Description
A quick remix to mount the LST-S2 camera instead of the head on the Dancing Rider driver figure. I put a round 12x2 neodymium magnet inside of the body, in the slot of the neck part and a bit of blu tack in the neck slot of the driver figure to keep it stable but easily switchable for the original head. Can be mounted using a long screw for a permanent mount. It has adjustability to allow for seeing the hands, i use it at the furthest extension so the hands are not seen. The small upright part next to the screw slot on the cam mount is to friction fit the antenna so it is held upright. The camera unit does friction fit but i added an o-ring over the lens and down behind the tabs to be sure it stays securely in position. I use the same magnet-inside-driver-figure-blue-tac-in-between-magnetized-head for my Sand Scorcher shells so this might fit in those as well, havnt tried it yet.
Statistics
Likes
0
Downloads
0