Universal Spool Holder
Description
This filament holder is a rigid structure for different diameters of coils. This filament holder allows you to install coils with an inner diameter of a pipe from 25mm to 78mm. For assembly you will need: - construction stud or M10 bolt 150-160mm long; - 2 nuts M10 8mm thick; - 2 washers M10 with an outer diameter of 19-20mm and a thickness of 1.5-2mm; - 2 bearings 6000-2RS (26mm outside x 10mm inside x 8mm thick); - cyanoacrylate glue; - red thread lock. Printed with the following settings: - filling 30-50%; - support from the table; - layer 0.2-0.3 mm. Using glue, you need to glue the washers on the pushers of the stand and the handle, for the least wear on the structure. Using a thread lock, you need to fix the stand nut. In the attachment, as always, I place the source files of the project for Autodesk Inventor.
Statistics
Likes
0
Downloads
0