100W DIY Powerbank Ip5389
Description
This is DIY powerbank that uses a board with the Ip5389 chip capable of 100W USB-C PD. This is still WIP as the alignment for the on/off button and the DC barrel jack is not quite right ant the whole case is just 1mm thick. Additionally to the I/O ports of the powerbank board there is space for a XT60 connector that can be directly connected to the battery via a fuse. The Case is designed to fit 4x 26650 cells, I'm currently using LiFePo4s from Lithiumwerks, that allow high amperage to power devices like a portabe 12V coffee maker from handpresso. You can still use the seperate frontplate for use in your own design if you just need the dimensions for the ports.
Statistics
Likes
0
Downloads
0