Carrera GO / 143 Curbs - 57mm

Description

** CARRERA is a registered trademark - I am NOT affiliated with CARRERA ** This project was requested and adds **57mm** (= 114/2 = one standard track width) wide curbs to your Carrera GO / Digital 143 track. For driving or drifting cars without magnet (e.g. SCX Compact)! The original project with 40 mm wide curbs is shown in this YouTube video: https://youtu.be/1u6cYjKVWMs **Straights** - S100: For 100 mm straights - S114: For 114 mm straights or use 3 for a 342 mm standard straight - S114 end: For ending a curb section on a 114 or 342 mm straight - S171: For 171 mm half straights or use 2 for a 342 mm standard straight - S228 dual mount: For 2x 114 mm straights or for a 342 mm straight (e.g. in combination with S114) - S228 single mount: For track components with blocked mounting grooves (e.g. digital cross section, starting line, etc.). - SU: Universal and scalable curb for straights (scale the length in your slicer; recommended: 30-100 mm) - Mount between two adjacent curbs as this parts has no mounting groove for the track **Curves** COMING SOON: - K1-45 inner curb: For K1 45° only (NOT for K1 90°) - K1-90 inner curb: For K1 90° only (NOT for K1 45°) - K1-45 outer curb: For K1 45° and 2x for K1 90° - K2-45 inner curb: For K2 45° - K2-45 outer curb: For K2 45° - K2-22.5 outer curb: 2x for K2 45° (for smaller printers) - K3-45 inner curb: For K3 45° - K3-22.5 inner curb: 2x for K3 45° (for smaller printers) - K3-22.5 outer curb: 2x for K3 45° **Accessory** All accessory can be downloaded from the original project: https://www.thingiverse.com/thing:5776023/ - Clips C-C (Curb to Curb): Connects 2 curbs with each other - Riser 10 mm: Used to rise the curbs for digital track components with 10 mm height - Riser 8 mm: Used for the transition to 6 mm track height - Riser universal: Use for individual heights (specify the height in your slicer) - Additional track boundaries: https://www.thingiverse.com/thing:5807029 **Notes** - This project is based on my 40 mm wide curbs (https://www.thingiverse.com/thing:5776023/), the files are **untested** as I'm using the 40 mm one! Please comment if you have any problems. - Mirror asymmetric parts in your slicer if you need it for the other side - For guardrails you can use this design: https://www.thingiverse.com/thing:3356677/ by Remvs **Updates** 2023-01-29: First parts with 57 mm width released **Tags** Carrera, Go, Digital, 143, 1:43, Curb, Curbs, Shoulder, Shoulders, Randstreifen, Extension, Extensions, SCX, Compact, Drift, magnetlos

Statistics

Category

Tags