Blastgate 148 - 150 - 152 - 160 mm, customizable
Description
A compact blast gate intended for dust extraction in the wood shop. Designed to be printable on a Prusa i3 MK3, since this print uses almost the entire print bed. The longest part is 236 mm. I designed this to fit different size ducting and hoses. Apart from differences in diameter, the "A" parts are identical and can be used in any combination. The blast gates work very well in practice, with a smooth operation, and the lid opens fully. The 148 mm part fits a European 150 mm flexible coiled hose best. The 150/152 mm parts might fit US 6 inch hoses better. The 160 mm part is made to fit inside the fitting of a Swedish 160 mm sewage pipe/drain pipe. I have also made a 100/110 mm blast gate, posted as a separate thing. Please note: to print a complete blast gate, four parts are required: * Two "A" parts, choose appropriate sizes * The "B" part * The "C" part Six M5 x 15 screws, washers and nuts are required to mount the blast gates. Make sure to place the sliding lid in position before inserting the screws. If the lid slides poorly, a little bit of silicon spray lubricant might help. Enjoy!
Statistics
Likes
0
Downloads
1