Pincab Test Button Holder
Description
This is a complete from-scratch redesign of the excellent "Pincab Test Switch Holder + Cable organizer" by jawah, available at https://www.thingiverse.com/thing:3983345 . I wanted a similar design but didn't want the cable organizer, and I wanted the coin door button on the front. Similar to jawah's design, I use 7mm momentary pushbuttons, EXCEPT for the coin door button, which is a 7mm **latching** pushbutton (non-momentary). You could instead use a "miniature toggle switch" for the coin door switch, and just orient it to toggle left and right to match the lettering on the case. The cable entry in the back has a notched base to support a small zip tie. The zip tie should help hold the cables in place, but isn't required. There's a v1 design and a v1 inverted design. The inverted design is identical except the tiny icon representing "open" and "closed" is reversed. This is to match whatever you happen to have set in Visual Pinball for the "InverseKeyCoinDoor" setting. If you have it set to True, use the inverted design. If it's set to False (the default), then use the regular old v1 design.
Statistics
Likes
0
Downloads
3