Candelabra1
Description
For this design I used a method for equally distributing points around a circle. I made this small candelabra to test the ability of my printer to print small tall thin shapes without breaking them. Candelabra1 shows that all the candles printed OK, although the tall ones did wiggle a little when the hotend got near the top. Even though my standard print speed is 100 mm/sec candelabra1 took a little less than 15 hours to print. This is because slicers slow down the hotend for small moves, and for this STL file my slicer (SuperSlicer) generates almost entirely small moves.
Statistics
Likes
0
Downloads
0