SSD Stackers for 5x or 4x drives (fits Crucial MX500 and others)
Description
Remix from ryang3d's original design. I removed the screw holes under all the drives in the stack except for the first / top one. This makes it easier to screw in the bottom mounted screws on the first / top drive in the stack, and doesn't require a special long and thin screwdriver. I also modified the spacing between drives to allow for a slightly larger Crucial MX500 SSD drive which is bigger than 7mm but smaller than 9mm. This will work great in one of my TrueNAS arrays inside a smaller Mini ATX case.
Statistics
Likes
0
Downloads
0