Longest Road Trophy +2
Description
I printed using PLA TOUGH. See setting details. Finally got around to design my longest road trophy. This print took about 16 hours in total. It's fairly large but I wanted to make a big trophy so that you really feel like you've won something ;) Tips on print settings: I printed using PLA TOUGH: I did not dry it prior to print. 1. I used Ultimaker Cura Slicer (settings listed below) 2. Layer Height: .14mm (basically your main quality setting) 3. Line Width: .4mm 4. Wall Line Count: 4 5. Top/Bottom Layers: 6 (like I said, I wanted it to be heavy) 6. Enable Ironing: On (I wanted the terrian to be smooth) 7. Infill: 40% a) Infill Line Distance: 3.0mm b) Infill Pattern: Cubic 8. Printing Temp: 215 C 9. Build Plate Temp: 60 C 10. Initial Layer Build Plate Temp: 63 C 11. Enable Retraction: On 12. Reaction Retract Speed: 35.0 mm/s 13. Travel Speed: 90.0 mm/s a) Once the first 4 layers were printed on my Ender 3 V2, I increased the speed to 150%. 14. Fan Speed: 100% 15. Build Plate Adheasion Type: Brim 16. Brim Line Count: 7 Feel free to ask any questions you have. Hope you enjoy it as much as I did!
Statistics
Likes
0
Downloads
0