OG Powell-Peralta style Tail Guard
Description
This is a Powell-Peralta classic style tail guard for your reissue decks. There are two files uploaded. One of them is the tail guard main body, you can simply print it with 100% infill and get the job done. If you want to print faster with less material but same strength, you will need the other file named 'reinforcement' - align the reinforcement part with the rear end of the tail bone where it takes the most beat from the ground, then use 'overlap settings' in the slicer for the reinforcement part, set the infill rate to 100% and infill pattern to concentric, so that you have a solid rear end for abrasion. Set the infill rate of the main body to 40%, infill pattern to gyroid. My settings for your reference. Filament: Ploymaker Polylite PLA Pro Nozzle: 0.4mm Layer height: 0.2mm Wall line count: 10 Top layer count: 15 Bottom layer count: 10 Infill rate: 40% Infill pattern: Gyroid Overlap settings for the rear reinforcement part Infill rate: 100% Infill pattern: Concentric
Statistics
Likes
0
Downloads
0