True 18650 Battery Holders (x1 and x2)
Description
For now, see the remix for printing and assembly instructions. I printed 3 walls (1.2mm for 0.4 nozzle users), 50% infill, lines, grid or gyroid will do. Supports (grid) are recommended. They are easy enough to remove. Keystone 209, which is ground, snaps in from the top (longer air gap side). Keystone 228, which is positive, snaps in from the bottom (shorter air gap side). Route wires as you want with the channels underneath. 22AWG worked best for me. The x2 is parallel. I will add a series version soon. Possible an 3x and 4x in various configs. Who knows.
Statistics
Likes
0
Downloads
2