M-Jump TE-754 Screwdriver Holder for shelf mounting
Description
Needing some pretty small flat and Phillips screwdrivers to work on my electronics projects, I bought a very inexpensive set from Amazon. Model TE-754 made by M-Jump (obviously Chinese) for less than $9.00. The set has 6 screwdrivers, Three Flat blade with blade size 1.5, 2.0 and 3.0 mm wide as well as 3 Phillips blade of 1.5, 2.0 and 3.0 mm diameter. I also needed a way to keep them organized. I have a 2 X 8 shelf that runs the length of my workbench which has the computer monitors and tons of junk (I'm not that organized, LOL) on it that is perfect for such things as a tweezer holder and now the screwdrivers as well. I did a quick design in Fusion 360, printed it in a little less than 4 hours and now have it installed on the shelf with a couple of small wood screws. I'm also printing a version of this holder that will stand upright on a bench or desk top and will post that later once I confirm that the print is good. Nothing is too critical in the print, use 15-20% infill to save filament and speed up print time and just about any type filament can be used though PLA is totally adequate. I just happened to have some HT-PLA+ by FilaCube on the printer so that's what I used for this.
Statistics
Likes
0
Downloads
0