Longer LK4 Pro Cable Chain
Description
#What I modified: - From https://www.thingiverse.com/thing:4658736 >- cableChainLongerAdapt_ExtruderSide.stl >>- Fixed mesh vertices >>- Simplified mesh (see image) >>- Widened hole to better fit the screw - From https://www.thingiverse.com/thing:3132855 >- Hot-end-side-link_v8.stl >>- Fixed mesh vertices >>- Moved the axis to the right to make it easier to insert cables >>- Thickened the mounts to make them less prone to crack >>- Filled honeycomb to save filament - From https://www.thingiverse.com/thing:2920060 >- cableChain_XendCover.stl >>- Tightened the band because it was colliding with cableChainLongerAdapt_ExtruderSide (see image) >- cableChain_link_v3.stl >>- Fixed mesh vertices >>- Increased snap of cableChain_linkCover_v2 *** #Printed parts: For my Longer LK4 Pro I printed and used (see image): <table> <tr> <td>cableChainLongerAdapt_ExtruderSide_Mod</td> <td>x1</td> </tr> <tr> <td>cableChain_XendCover_Mod </td> <td>x1</td> </tr> <tr> <td>Hot-end-side-link_v8_Mod</td> <td>x1</td> </tr> <tr> <td>cableChain_link_v3_Mod</td> <td>x12</td> </tr> <tr> <td>cableChain_linkCover_v2 (from https://www.thingiverse.com/thing:2920060)</td> <td>x12</td> </tr> </table> *** #Print Settings: I printed as they are oriented in the files, everything without supports except for cableChainLongerAdapt_ExtruderSide_Mod (see image) I used the eSun PLA Matte grey filament *** #Donation If my work has helped you, consider buy me a coffee (I prefer it espresso :3). Thank you https://www.paypal.me/ft756866932
Statistics
Likes
0
Downloads
0