Triumph Gear-lever Gaiter Finisher
Description
This is the gaiter finisher that goes with RobH-J's Triumph GT6 Gear-lever Gaiter Ferrule Insert 618945 619812 found at https://www.thingiverse.com/thing:4270590 You can print it on FDM, but a more attractive result will be obtained with UV resin printing and following up with a couple coats of Rustoleum's Bright Coat Metallic finish. Use an "ABS Like" resin that won't be brittle. I modeled the exterior in OpenSCAD by looking at photographs. I then subtracted RobH-J's model from the center and then made further refinements to provide clearance for the boot. I then scaled it by 3% to provide easy thread clearance.
Statistics
Likes
0
Downloads
1