Bulkhead Coupler Assembly for Reverse Bowden Tube 4MM OD
Description
This is bulkhead coupler to mate two 4MM OD Bowden tubes between a barrier. I used them on my Filament dry box that had 6MM holes to fill. The thread is printed but I finished each with a 6MM x 1.0 tap and die set. After that, I test fit the thread and worked the loose shavings free. The fit around the 4MM OD tube is very tight. I cut the tip of the Bowden tube at an angle to help get it started.
Statistics
Likes
0
Downloads
2