Prusa MK3 Camera Mount
Description
Logitech C920 webcam mount for Prusa MK3. Additional Hardware needed: M5x18mm (or M5x20mm) = 5pcs 1/4-20 x 1in. = 1 pc. DO NOT OVERTIGHTEN HINGE BOLT It is best to print the Camera Hinge upright for best strength properties with 100% infill (I printed it flat and it broke pretty quickly). The Camera Arm can be printed with 15% - 100% infill as desired. Webcam base should remain attached to webcam no modification needed. Bolts will be snug when threading into printed parts. Bolt hinge into Prusa aluminum extrusion with an X pattern making sure to thread bolts in evenly.
Statistics
Likes
0
Downloads
2