GoPro Knob for pan-head screw
Description
I wanted to print some knobs to attach my GoPro to it's base, but most of the knobs on here assume you're using hex-head bolts. My local Home Depot only had [pan-head screws](https://www.homedepot.ca/product/paulin-pan-square-machine-screw-m5-80-x-50-6pcs/1001588019), so I designed this. There's a threaded portion at the bottom, so you just need to screw the screw/bolt into place. There are three versions attached, for M5x30, M5x40, and M5x50 screws. I've also attached the Fusion 360 file, so if your screws don't have a 9.15 mm diameter head, you can just change “screwHeadDiameter” to match your screw. There's also a “screwLength" parameter you can adjust if you want to make these for M5x35 (or if, as in my case, your cheap Home Depot screws are actually M5x49).
Statistics
Likes
0
Downloads
5