SnapMaker 2.0 TopFeed Bridge for Sunlu S2
Description
This massive bridge will Span over the housing of the SnapMaker 2.0 350. It is meant as a Stand for the Sunlu S2 FilaDryer S2 and also for an USB extension hub (so it is easier to feed your printer with new GCode from a pendrive - without fiddling around with the printer housing door). Alternatively, you could also print the Sunlu part twice and have 2 FilaDryer S2s on top of your SnapMaker - in case you run the new dual extrusion head. The Sunlu S2 should also have the Bottom Feed Mod, which is also one of my things/ designs I uploaded. Check also the YT description Video: https://youtu.be/1AMUp0FKPK8 I have used this USB extension for my mod: https://www.amazon.de/dp/B06XHMXQ3Y?psc=1&ref=ppx_yo2ov_dt_b_product_details To connect the two pieces, you need 2 rods with 8mm diameter and length approx. 150mm. Also, you should have some longer screws to change against the original screws of the fixing of the top side.
Statistics
Likes
0
Downloads
2