Rasperry Pico w/ Screw Terminal GP2040 Enclosure
Description
This is an enclosure for the Treadax Raspberry Pi Pico Breakout Board with Screw Terminals [1]. Specifically, I use it to connect the buttons in my arcade cabinet using xinput via the GP2040-CE firmware from the OpenStickFirmware. That's why there's a P1 shaped hole (I also have a P2 version to contain the Pico for player 2, available on request). There are openings on both sides for cables from the screw terminals to pass through, as well as a slot for the micro-USB port (which likely requires a support) This enclosure is only designed to fit the Treadax PCB, which measures: 43.2*57.8mm (1.7*2.28inch) [1] https://www.amazon.co.uk/Treadax-Compatible-Raspberry-Breakout-Flexible/dp/B094HTM6PZ The roof of the enclosure slots into the baseplate using pressure-fitted 2mm feet with a 0.1mm tolerance, so your printer probably needs to be well calibrated for it to fit nicely.
Statistics
Likes
0
Downloads
0