Bambu Lab - Poop Bucket, Filament Waste Bin - X1 and X1 Carbon
Description
Poop bucket/filament waste/purge bin for the BambuLab X1 and X1 Carbon, probably suitable for P1P also. I remixed this as some are very chunky but I liked the original POOPY SHOE by RAMServices1959 as it's much nicer - but it didn't have a logo on the part and lower section is quite shallow. I also wanted to make the lower section a bit deeper so it could hold more waste as I'm lazy and don't want to have to empty it too often. Poop should fall out of the back, slide down into the lower section and then it's easy to just grab a handful out and put into my filament recycling. I've included my Bambu 3MF file, the STEP file and two STL formats, one is a custom high density STL setting, the other is advanced mesh refinement setting - both should be good but personal preference. Single-part, multi-colour print. Yes, it's a big part - import it > orient it > rotate it away from 'keep-out' zone > right-click > centre it. You may need to move the Purge Tower to a more suitable location, unless using the 3MF. Thanks!
Statistics
Likes
0
Downloads
4