Graphics Tablet Mount Huion H1161
Description
Thanks to baerchenkotze_de for the original. Modified to better fit my tablet Added screw holes for extra support. Moved the pen holder so that the pen is stored parallel to the tablet, and does not protrude from under the desk. It is not an accurate model of the Huion H1161, but it should still work well enough. As with the original, it is designed to be used with felt padding for a snug fit and to protect the tablet from scratches. Designed to be used in landscape orientation. I guess portrait would work too, though I would move the pen holder forward in this case, and maybe extend the brackets a bit. Printing now with these settings... Nozzle: 0.4mm Layer Height: 0.28 Walls: 4 Infill: Gyroid 18% Print Orientation: Vertical Supports: Everywhere Filament: SUNLU Shiny Silk PLA+ (probably not the best for this, but we shall see) Print time estimate: For the left side only (no pen holder) ~ 4 hrs Uploaded all the useful (I think) file types, making it easier to mess with. Will update if it all goes to plan (or not), and again in a few months if it lasts (or not). :)
Statistics
Likes
0
Downloads
0