Voxlab Aquila X2 Emeet Web Cam Mount
Description
I recently got the Eryone StarOne, and searching for things to add on to it, I noticed, there is nothing for this printer!!! But after some searching I realized that that what I actually have is the Voxelab Aquila X2. I use Octoprint so I wanted to add a cam to this printer. I found this cam on Amazon [https://www.amazon.com/gp/product/B09KCJ36FS](https://www.amazon.com/gp/product/B09KCJ36FS) Then I needed to find a way to mount it to the printer. Came across this one [https://www.thingiverse.com/thing:5629524](https://www.thingiverse.com/thing:5629524) But was not crazy about (1) the way it mounted to the printer and (2) how long the arm was. I started to search for a different mount and found this one. [https://www.thingiverse.com/thing:4856680](https://www.thingiverse.com/thing:4856680) But was not crazy how it was designed to mount a cam. I remixed it to add the connector from the cam mount. I then took the arm from the first thing and mirrored it so it will work on the left side. At first I kept it the original length but found the cam to close to the bed and the video was a little blurry because it was way to close. I then held the cam at different distances and angles and found a good spot took some mesurements and then cut it up and remixed it. Printed the mount as it was originally and as I was taking the supports off, it broke with ease. So I did some remixing: A - Filled in this area B - Removed the side walls to allow for more movement to adjust the angle C - Made the mount area longer for more support D - Added more material below the mount (C) to add more support.  I have included the 3MF files for both parts with some areas as separate parts. not sure how these files will act in other 3D editing programs, but, I do my remixing in MS 3D Builder. For example, the arm is broken into 5 parts, so you can extend or shorten, and make the angle longer or shorter.  I might remix this to add a GoPro mount but, You can remix this to accommodate any cam mount out there. If you do a remix, please post it I would love to see it.
Statistics
Likes
0
Downloads
0