Danchee Ridgerock knuckle weight hanger
Description
Hollow shell to fill with heavy material and clamp to the steering knuckle to lower your cg. I filled them with Roto203 low melt alloy and they came out 75grams each. You could fill them with anything heavy like lead shot. With these installed on the front axle only it changes the weight distribution to 55/45 You need to trim the inner bead lock plate as shown in the 2nd pic for these to fit. There is a round rib on the back of the plate that makes it easy, just sand/file/lathe/etc until you hit the rib.
Statistics
Likes
0
Downloads
0