Window / Wall Mount for Ring Indoor Camera
Description
This allows you to mount a Ring Indoor Camera to a vertical surface, including windows and walls. I wanted to be able to stick my Indoor Cam in a window facing out, but also keep the cam on its original swivel / pivoting base. This has a cup that the base of the cam sits in - it's a friction fit, to keep the cam stationary. The cup is set back from one side, to give enough room to tilt the camera before hitting the window glass. If you're using this in a window facing outdoors - be sure to turn off Infrared Lights for Night Vision setting. If you want to mount it on a wall, just face the camera the opposite direction. I used 3M Command strips to mount this to the window. My print settings for a stock Ender 3 S1: * 0.2mm layer height * walls = 3 * 15% cubic (adaptive) infill * 50 mm/s print speed * Tree supports * 200 degree hot end * 60 degree bed * Hatchbox gray PLA
Statistics
Likes
0
Downloads
0