Customizable screw Easier print - non standard in Freecad
Description
Customizable screw Easier print - non standard in Freecad ========= ###Standard screws threads angle are 60 degrees making it wasteful to print due to top layer inner expansion. In this freecad archive the threads are set to 90 degrees, which gives a cleaner and easier print since roof expansions aren't necessary compared to the standard 60 degrees. The stl example file is 3mm pitch. Change the pitch, angle and diameter of the thread as your necessity. - open the freecad archive - open the spreadsheet - set the B1, B2 and B3 cells that are diameter, pitch and angle respectively
Statistics
Likes
0
Downloads
0