Axial Capra Link Riser
Description
A simple piece that slots into the stock axle truss, uses stock upper link mout and upper link mount screws for attachement. recommend to Print at 0.1 layer heights and 4 walls / 8 top bottoms, for better strength and detail. the holes on top are made to slot in a screw and secure with a nut on the other end, not meant to be threaded in. Youtube: https://www.youtube.com/@CRCG_00 Ebay: https://www.ebay.com/itm/175534091201
Statistics
Likes
0
Downloads
0