LHTCUBL T2
Description
The newest revision to the Low Hardware Talon Claw U But Longer Tranche 2! I included a photo of a Caliburn 4 for a size comparison. They're very similar overall, but LHTCUBL is very slightly shorter due to being short dart-only. There are a couple of noteworthy additions from Tranche 1, namely; Fully enclosed front end - U channels are extended to a front muzzle and a full pump grip based on Captain Slug's 4Doom pump grip will wrap around them and provide a TON of stiffness to the priming of the blaster. New stock options - There are now three options to pick from; 1-piece stock 1-piece buffer tube 2-piece stock (front and back pieces allow multi-colors or TPU if desired. Print an extra screw and 2 spacers to solidly connect the pieces!) New plunger design - Incorporates a speed seal and spring guide rod, which does wonders for K31 and other very narrow springs (including K26). It's OKAY if it doesn't seal when you're moving the piston through the plunger by hand. The extra speed and energy from the spring is what creates the seal; reducing friction and improving performance. Depending on your settings, you may want to glue this together. The minimum barrel length is ~30cm or 12". These provide JUST enough length to fit a Worker injection molded SCAR to completely cover the barrel. Which should help if you wanted to try this blaster in HVZ. To give you an idea of Spring/Barrel combos and their performance: 1 - K31 (5kg), 12" .527 aluminum barrel, Worker SCAR, DZ Max darts - 130 FPS (Use HEs, or AF Pros if you need a couple less FPS) 2 - 788 (7kg), 40cm Kury barrel, DZ Max darts - 200 FPS 3 - K26 (14kg), 55cm Worker Swift barrel, Worker Bamboo darts - 290 FPS
Statistics
Likes
0
Downloads
0