Artillery Genius Pro - Marlin 2.1.2 Firmware
Description
### Marlin 2.1.2.0 firmware for Artillery Genius Pro ### (compatible with TFT GD32F305) ## [Source @ Github](https://github.com/MirakelPrints/Marlin) *** **Remix of freakyDude's the Marlin Firmware, all Credits go to him** Original Firmware of @freakyDude can be found here: [https://www.thingiverse.com/thing:5359311](https://www.thingiverse.com/thing:5359311) **Caution: No warranty, no support, do it only - if you know what you are doing, it's absolutely your own risk. I'm not responsible for any problems/defects...** For instructions, follow [@freakyDude's blog post](https://blog.freakydu.de/posts/2022-09-30-flash_marlin_sidewinderx2/). *** ### 2.1.2-gpro_mp.02.bin **Full Changelog**: [2.1.2-gpro_mp.01...2.1.2-gpro_mp.02](https://github.com/MirakelPrints/Marlin/compare/2.1.2-gpro_mp.01...2.1.2-gpro_mp.02) **Updated Features:** - change BLOCK_BUFFER_SIZE (64) - change BUFSIZE (32) - change RX_BUFFER_SIZE (2048) - enable SERIAL_XON_XOFF *** ### 2.1.2-gpro_mp.01.bin **Full Changelog**: [2.1.2-gpro_stock...2.1.2-gpro_mp.01](https://github.com/MirakelPrints/Marlin/compare/2.1.2-gpro_stock...2.1.2-gpro_mp.01) **Updated Features:** - enable ABL_BILINEAR_SUBDIVISION - enable ARC_P_CIRCLES - enable EXPERIMENTAL_SCURVE - enable EXTRA_PROBING (1) - enable GCODE_CASE_INSENSITIVE - enable LIN_ADVANCE (0.13) - enable MULTIPLE_PROBING (3) - enable SDSUPPORT - enable SD_CHECK_AND_RETRY - enable SERVO_DETACH_GCODE - enable SHOW_REMAINING_TIME *** ### 2.1.2-gpro_stock.bin Using stock configuration files for Artillery Genius Pro from: [https://github.com/MarlinFirmware/Configurations/tree/release-2.1.2/config/examples/Artillery/Genius%20Pro](https://github.com/MarlinFirmware/Configurations/tree/release-2.1.2/config/examples/Artillery/Genius%20Pro) **Features:** - enable ADAPTIVE_STEP_SMOOTHING - enable BABYSTEPPING - enable EEPROM_AUTO_INIT - enable EEPROM_INIT_NOW - enable S_CURVE_ACCELERATION - enable Z_SAFE_HOMING
Statistics
Likes
0
Downloads
0