Atomstack A20 Focus alignment guide
Description
With this alignment tool it is possible to align workpieces with 0mm or 1mm offset to the laser focuspoint. The Atomstack laser head has a size of 63mm x 58mm. Preparation: 1 Draw a frame in Lightburn the size of the workpiece (T1 or T2). 2 Place the graphic. 3 Position the laser at the bottom left (Frame). 4 Place the alignment aid against the laser head. 5 Place the workpiece on the alignment aid. 6 Remove the alignment aid. 7 Fire
Statistics
Likes
0
Downloads
0