Longer Ray5 Air Assist Hose guides and clamps
Description
These are clamps and guides I made to route the hose for the Longer ray5 air assist. these allow the hose to be run cleanly, without having to ziptie the hose and crimp it. The clamps are held in place with the enclosed small ziptie hole in it. the guide for the hose is placed on the top of the laser assy, by removing one of the screws, run through the guide and screw put back in place. the hose that comes with the air assist will squeeze tight enough to slip through the slot in each piece.
Statistics
Likes
0
Downloads
0