USB powered WIFI Clock (8USD)
Description
Finally found a cheap USB powered clock that will sync time off the internet via Wi-Fi! But didn't have a case/holder. So I designed a simple snap on holder to tilt it 15 degrees and make it more stable. Please read through description below about the Wi-Fi clock before proceeding to print. Firmware on the clock is for time zone GMT+8 hours, if you like a different time zone, you will need to flash a different firmware. I have not tried that as the current time zone is perfect for me. I find the original firmware has a security flaw as anyone can assess it through the Wi-Fi SSID and know your home Wi-Fi password. My workaround is to put some conductive tape over the Wi-Fi antenna to weaken the Wi-Fi signal. In original state is quite weak already but will likely still penetrate through one wall. Firmware available on Github. (Proceed at own risk) https://github.com/maarten-pennings/303WIFILC01 Sorry I lied, price is lower than 8USD. =) I bought from this seller below https://a.aliexpress.com/_mLMmSTk Alternatively can buy from this seller. https://a.aliexpress.com/_mrUi3EI I added an affiliate link below if you like to support me, but I would prefer you use the tip designer button at the side (The affiliate link cost significantly more while my commission from that is a small fraction of that difference in price.) Affiliate link: WiFi clock module 0.8 inch https://s.click.aliexpress.com/e/_Dm0b6mN
Statistics
Likes
0
Downloads
0