RT3200 / E8450 Wall mount case
Description
Wall mount case for Belkin / Linksys RT3200/E8450 Print with a brim to avoid warping. The top case has 3mm holes for inserting transparent rods to run down to LEDs on the main board. You will need to print the main housing (belkin-rt3200-closed-back or belkin-rt3200-honey-back), plus the panel (belkin-rt3200-panel) and the cover (belkin-rt3200-top-cover). The cover has the OpenWRT logo on the front. To remove the board from the original case: 1. Remove the stickers on the bottom of the stand to reveal 4 screws. 2. Remove the 4 screws 3. Pop off the bottom cover to reveal 2 more screws which lock an internal caddy in place 4. Remove the screws and then slide out the caddy 5. Remove the three screws holding the board in the caddy You can use the 3 screws holding the board in the caddy to muont the boad into the housing, and the 4 screws keeping the bottom cover on, to attach the cover to the housing. Cheers
Statistics
Likes
0
Downloads
0