Ultimarc Ultimate I/O (I-Pac 4) Arcade1Up Mount
Description
This is a mounting bracket for the Ultimarc Ultimate I/O (I-Pac 4) board, with screw holes that match the Power/Volume button bracket in Gen 3 Arcade1Up cabinets if you want to mount it inside the control panel on those machines. If you do this you will need to cut away part of the black plastic bottom cover of the control panel so it has clearance. I've included a picture showing what I cut away. *NOTE*: This board is asymmetrical, if the screw holes don't align, rotate it 180 degrees. The edge notches should be on the side of the board with the USB and power ports. I've included an STL that shifts the bracket 2mm further away from the buttons, I needed this for extra room for the spinner I put in place of the center "Live" button. You can edit the EXTRA_SPACING value at the top of the OpenSCAD file if you want to adjust it one way or the other, with positive values putting it further from the buttons, and negative putting it closer.
Statistics
Likes
0
Downloads
0