Joystick handbrake
Description
Made a handbrake following this tutorial: https://www.youtube.com/watch?v=9euVny6ivHw& but made my own 3d models, and other modifications to it. Threaded the inside of the cable tube with m10, and put threads on the knob, so it just threads in. I also added some padding on the both sides of the seems of the axis stopper. so it does not make that big of an sound, and does not bounce around as much. Made a table clamp out of 3mm sheet metal, and used a m16 bolt and nut with it. You can easily model one, and print it out of plastic, but I wanted it to be extra sturdy. Used 4 m6 bolts through the bottom of the joy stick to hold it to the clamp, and then cut the extra bolt of with angle grinder. Also added a few slip resistant pads on the bottom of the joystick, so it will not scratch the table.
Statistics
Likes
0
Downloads
0