Ronin RS2/RS3 Pro Crossfire Mount
Description
I know most people looking this answer for their questions, about how to control RS2/RS3 Pro with TBS Crossfire or Tracer. First of all, lemme start with bad news. - This function is not available on RS3, since there are no RSA port on RS3 (so far this is my final assumption, since couldn't find any resolution.) - This function is only re-center your roll axis. So far, unless modify your Ronin's hardware, or doing any servo modifications, the other axis' (pan, pitch) not working. The part I designed is inspired from an other user (sorry, I forgot his name). Please refer his design as a starting point, and treat my design as a remix. The part can be printed PLA or any other material. You can use either the original focus wheel's mainboard and the plate or you can use only crossfire with 10-100k ohm resistor. Second option would be cheaper tho :) ---------------- First option: If you like to use the focus wheel, you can solder crossfire directly to the pins inside the card. No need to use a resistor. Just use 2mm screws to close the cap and start using. Second option: If you don't have a focus wheel and like to do DIY version, use the diagram I attached. ---------------- If you have any questions, please feel free to ask.
Statistics
Likes
0
Downloads
0