Carrousel for 40 minidisc in cases
Description
This is a 300mm diameter Carrousel design that can hold up to 40 minidisc in cases. This can be stand alone or can be coupled with an 8 inch / 200mm Lazy susan bearing for turntables. This way you can rotate the carrousel as you please. It has 4 premade holes for the Lasy Susan holes, however, dependeing on the brand you might have to make your own holes. Just make the holes for the inner ring and not the outer. Also add some washers between the susan and the carrousel so it can rotate properly. Here is an example of a Lazy susan that could fit: https://www.amazon.com/Geesatis-Turntable-Accessories-Hardware-Rotating/dp/B084ZLKCVB/ref=psdc_3743971_t5_B08FDK3SNK This model should be printed upright at .2mm layer height. I recommend you print it with 15% to 25% infill. You will need a printer with a 300mm bed (at least).
Statistics
Likes
0
Downloads
0