Spice Rack
Description
Spice Rack design based on work done by [Robert Alvin's - Spice Rack Pullout Design Update](https://www.thingiverse.com/thing:4826878). I wanted a bit larger / wider tray that would hold larger spice bottles. I also had trouble printing the tracks from Robert's design so I made this to mount on drawer slides. finished size is 370mm x 70mm (about 14.5" x 2.75") Each rack required 2 lower and 2 upper trays. Trays assembled with the following hardware: 1 x [14 Inch Hardware 3-Section Full Extension Ball Bearing Side Mount Drawer Slides](https://www.amazon.com/Hardware-3-Section-Capacity-Extension-Bearing/dp/B0822WL9XB/ref=sr_1_6?crid=1XBJSM6K7VGWB&keywords=drawer%2Bslides%2B10%2Binch&qid=1674911415&sprefix=drawer%2Bslides%2B%2Caps%2C111&sr=8-6&th=1) 4 x [5mm x 200mm 304 Stainless Steel Solid Round Rod ](https://www.amazon.com/uxcell-200mm-Stainless-Steel-Solid/dp/B082ZNKFVS/ref=sr_1_3?crid=1887XH85FZG0N&keywords=5mm%2Bx%2B200mm%2Bstainless%2Bsteel%2Brods&qid=1674929900&sprefix=5mm%2Bx%2B200mm%2Bstainless%2Bsteel%2Brods%2Caps%2C111&sr=8-3&th=1) 5 x [2mm x 50mm 304 Stainless Steel Solid Round Rod](https://www.amazon.com/uxcell-Stainless-Steel-Solid-Round/dp/B08M3LZRTT/ref=sr_1_3?crid=1GC3D0VRDBHVR&keywords=2mm%2Bx%2B50mm%2Bstainless%2Bsteel%2Brods&qid=1674930566&sprefix=2mm%2Bx%2B50mm%2Bstainless%2Bsteel%2Brods%2Caps%2C101&sr=8-3&th=1)
Statistics
Likes
0
Downloads
0